.
PO Box B | Cambridge, NE 69022 | PH.308.697.4698 FAX 308.697.4747 | beslerind@beslerindustries.com
 
 





 

 


COPYRIGHT© 2001
DWebware.com

 
Besler Quality Built Stalk Chopper
Model 7000   •   Model 5400   •   Model 9000   •   Model 8000


Model 5400/7000
The double rotor rolling stalk chopper is a versitile tool with applicatons in most farming practices, from ridge-till to conventional farming. With no gearbox or U-joints to maintain, this low-maintenance tool will provide years of dependanble service.
Besler Features:
  • Available in sizes 4 row narrow through 16 row wide...rigid or folding
  • Rugged 7x7 tool bar
  • The toolbar is filled with sand for additional weight
  • Triple seal bearings
  • Wide range of operating speeds vary from 5 to 12 MPH
Besler Options:
  • Available with 6 front blades and 7 rear blades (comes standard with 5 front blades and 6 rear blades)
  • Chain link harrows smooth out chop marks producing a good seedbed, for ridge-till and minimum till farming
  • Available with 3 or 5 bar spiked tooth harrow
  • Gauge wheels for added depth control
  • Heavy duty tongue and transport to accomodate pull-type applications


Model 7000:
Designed for versatility, the 7000 Stalk Chopper features different rotor angle adjustments. The machine is designed so the rotor angle can be set in three different positions to attain the desired aggressiveness.
Model 5400:
The proven Model 5400 is an aggressive Stalk Chopper. The 5400 has welded angled rotors set at a severe angle.
 
Model 8000/9000

High Speed Capability With Ground Driven Dependability
 
Besler Options:
  • Available with 3 or 5 bar spiked tooth harrow
  • Gauge wheels for added depth control
  • Heavy duty tongue and transport to accomodate pull-type applications
 
Model 9000 Features:
  • Available in sizes 4 row through 16 row...rigid or folding.
  • Two Rugged 7x7 tool bar.
  • Five Spiral Blades on a double tool bar.
  • Back Spiral Blade runs on reverse angle of Front Spiral Blade.
  • The toolbar is filled with sand for additional weight.
  • Triple seal bearings.
  • Wide range of operating speeds vary from 5 to 12 MPH.
Model 8000 Features:
  • Available in sizes 4 row through 16 row...rigid or folding.
  • One Rugged 7x7 tool bar.
  • Five Spiral Blades on a single tool bar.
  • Five Bar Spike Harrow.
  • The toolbar is filled with sand for additional weight.
  • Triple seal bearings.
  • Wide range of operating speeds vary from 5 to 12 MPH.

 

HOME | PRODUCTS | DEALERS | CONTACT US